Index Link

  • RootNode

Item

{"_buckets": {"deposit": "5cd74480-055e-4033-be09-f4f44bd88a36"}, "_deposit": {"id": "2377", "owners": [], "pid": {"revision_id": 0, "type": "recid", "value": "2377"}, "status": "published"}, "_oai": {"id": "oai:meral.edu.mm:recid/2377", "sets": ["user-uy"]}, "communities": ["ccm", "ccp", "kyauksetu", "ltc", "maas", "miit", "mlmu", "mmu", "mtlu", "mtu", "mub", "mude", "mufl", "pathein", "scu", "suoe", "tcu", "tgu", "tuh", "tum", "ucsm", "ucsmtla", "ucsmub", "ucspathein", "ucstaungoo", "ucsy", "udmm", "udmy", "uit", "um", "um1", "um2", "umkn", "umm", "uphy", "urj", "uvs", "uy", "yau", "ydbu", "ytu", "yude", "yueco", "yufl", "yuoe"], "control_number": "2377", "item_1583103067471": {"attribute_name": "Title", "attribute_value_mlt": [{"subitem_1551255647225": "Design and construction of induction Hardening Machine (Controlled Rectifier Module)", "subitem_1551255648112": "en"}]}, "item_1583103085720": {"attribute_name": "Description", "attribute_value_mlt": [{"interim": "When surface hardening is done by means of induction heating, the method is known as induction hardening. This method involves heating the component by an induced current to very high temperature and then quenching it to get required level of hardness. The advantage of the induction over the conventional methods is mainly the rapid heating of the surface of the component without an appreciable rise in the temperature of the core. This condition makes it possible to case harden components in a few seconds with very little distortion. In induction hardening process, a single phase ac power source is converted to a pulsating de supply and filtered. Then, the adjustable dc output of the filter is fed to a single phase bridge inverter circuit. At the last process, the medium frequency output current from the inverter is applied to the induction coil which also acts as heating coil In this paper, design calculation\r and test results for converter section of prototype model 5kW, 4kHz induction hardening machine is described. The bridge type rectifier circuit for induction hardening machine is designed and constructed by using SCRs as controlled elements. Thyristor gate triggering control circuit is also constructed to get the\r controlled range between 0° and 180°."}]}, "item_1583103108160": {"attribute_name": "Keywords", "attribute_value_mlt": [{"interim": "controlled range"}]}, "item_1583103120197": {"attribute_name": "Files", "attribute_type": "file", "attribute_value_mlt": [{"accessrole": "open_access", "date": [{"dateType": "Available", "dateValue": "2020-05-05"}], "displaytype": "preview", "download_preview_message": "", "file_order": 0, "filename": "Design and construction of induction Hardening Machine (Controlled Rectifier Module).pdf", "filesize": [{"value": "2763 Kb"}], "format": "application/pdf", "future_date_message": "", "is_thumbnail": false, "licensetype": "license_free", "mimetype": "application/pdf", "size": 2763000.0, "url": {"url": "https://meral.edu.mm/record/2377/files/Design and construction of induction Hardening Machine (Controlled Rectifier Module).pdf"}, "version_id": "939095dc-5dc6-4095-b519-904bb31a8fbe"}]}, "item_1583103131163": {"attribute_name": "Journal articles", "attribute_value_mlt": [{"subitem_journal_title": "Proceedings of the First International Conference on Science and Engineering", "subitem_volume": "1"}]}, "item_1583103147082": {"attribute_name": "Conference papaers", "attribute_value_mlt": [{}]}, "item_1583103211336": {"attribute_name": "Books/reports/chapters", "attribute_value_mlt": [{}]}, "item_1583103233624": {"attribute_name": "Thesis/dissertations", "attribute_value_mlt": [{"subitem_supervisor(s)": []}]}, "item_1583105942107": {"attribute_name": "Authors", "attribute_value_mlt": [{"subitem_authors": [{"subitem_authors_fullname": "Ei Ei Khin"}]}]}, "item_1583108359239": {"attribute_name": "Upload type", "attribute_value_mlt": [{"interim": "Other"}]}, "item_1583108428133": {"attribute_name": "Publication type", "attribute_value_mlt": [{"interim": "Other"}]}, "item_1583159729339": {"attribute_name": "Publication date", "attribute_value": "2009"}, "item_1583159847033": {"attribute_name": "Identifier", "attribute_value": "https://uyr.uy.edu.mm/handle/123456789/314"}, "item_title": "Design and construction of induction Hardening Machine (Controlled Rectifier Module)", "item_type_id": "21", "owner": "1", "path": ["1582967549708"], "permalink_uri": "http://hdl.handle.net/20.500.12678/0000002377", "pubdate": {"attribute_name": "Deposited date", "attribute_value": "2020-03-05"}, "publish_date": "2020-03-05", "publish_status": "0", "recid": "2377", "relation": {}, "relation_version_is_last": true, "title": ["Design and construction of induction Hardening Machine (Controlled Rectifier Module)"], "weko_shared_id": -1}

Design and construction of induction Hardening Machine (Controlled Rectifier Module)

http://hdl.handle.net/20.500.12678/0000002377
9b6f818e-19c0-4240-83c7-5c3b838ccd68
5cd74480-055e-4033-be09-f4f44bd88a36
None
Name / File License Actions
Design Design and construction of induction Hardening Machine (Controlled Rectifier Module).pdf (2763 Kb)
Publication type
Other
Upload type
Other
Title
Title Design and construction of induction Hardening Machine (Controlled Rectifier Module)
Language en
Publication date 2009
Authors
Ei Ei Khin
Description
When surface hardening is done by means of induction heating, the method is known as induction hardening. This method involves heating the component by an induced current to very high temperature and then quenching it to get required level of hardness. The advantage of the induction over the conventional methods is mainly the rapid heating of the surface of the component without an appreciable rise in the temperature of the core. This condition makes it possible to case harden components in a few seconds with very little distortion. In induction hardening process, a single phase ac power source is converted to a pulsating de supply and filtered. Then, the adjustable dc output of the filter is fed to a single phase bridge inverter circuit. At the last process, the medium frequency output current from the inverter is applied to the induction coil which also acts as heating coil In this paper, design calculation
and test results for converter section of prototype model 5kW, 4kHz induction hardening machine is described. The bridge type rectifier circuit for induction hardening machine is designed and constructed by using SCRs as controlled elements. Thyristor gate triggering control circuit is also constructed to get the
controlled range between 0° and 180°.
Keywords
controlled range
Identifier https://uyr.uy.edu.mm/handle/123456789/314
Journal articles
Proceedings of the First International Conference on Science and Engineering
1
Conference papaers
Books/reports/chapters
Thesis/dissertations
0
0
views
downloads
Views Downloads

Export

OAI-PMH
  • OAI-PMH DublinCore
Other Formats